Those look awesome!! i just switched from a life long 3 fletch blazer to bohning heats in a 4 fletch and am loving them as well.

 

Bohning has their stuff together. I use the X3 2.25 inchs. 3 degree helical. They fly like darts. Nice looking arrows.

 

I've used the Bohning X vane 3" parabolic for my daughter's arrows. Thought about using them for my hunting arrows, set helical, but I've the Bohning 4" Killiers.

I also use the Bohning X vane in 1 3/4" and 2 1/4" Shield cut - love them.

My daughter got her first Robin Hood using the 3" X vane. Later she got her first podium finish, 3rd place.

I've got one arrow fletch helical with the 4" Impulse. Awesome set helical. Only 5 grs, but tough. Put it through 2 layers of plastic canvas and a good 1/3 way through a truck bed liner. Ripped off the front, about 1/8" of the vane, but the base stayed. Used it like you see it the last ASA Qualifier I shot. It did great.

 

I just fletched a dozen Black Eagle PS23's for 3D works and indoor league. Up until now I've used nothing but AAE but decided to try the X vanes in 2.25" for these. I shoot a 4 fletch with slight right hand helical. I'm really happy so far with the adhesion and accuracy and plan to use more of these going forward. I've had the usual adhesion problems with AAE's using both their wipes, primer pen, and glue and then moved on to acetone for the vanes and shaft with Gorilla Green superglue. The acetone / superglue cured the problem with the AAE's and works great with the X vanes as well.

 

What jig and offset were you fletching these with?

 

bitz left clamp

 

Those look great. I’m just trying some 3” x vanes on my hunting arrows now. I have used the 1.75 inch on target arrows for years. Like I said before the more often I try other brands the more I like Bohning vanes.

 

I fletched 4 arrows to 3" X3 vanes to play around with and love them. I think they are a little lighter than the X , but with a more ridigid material than blazers. They are super quiet and fly fantastic.

 

Been shooting the 3” x vanes for a little over a year now, and I must say with some testing against the blazer they fly and steer IMO as well as the blazers and also look kool.
Good luck

 

Couple more Iv done since then

 

I started using blazers for ever then moved to the tac drivers, I found them to be really good but way too stiff. Now I just started using the x vanes and I must say I am impressed with them so far.

 

The Bohning vanes are the only vanes that I use.
Here are some Superdrive 25s fletched with the 3 inch X Vane. These are for a couple of 3D matches to support a local club. They seemed to fly fine out of my green Darton Vegas E 3D. I have not tried them at 60 yards yet.