Archery Talk Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,829 Posts
Discussion Starter #1
Trying to find the right balance, do I want a front heavy or do I want more towards the rear......I can't seem to find that sweet spot on my LX, my Cougar was easy I use a mid length stab 20" with no side bar and about 6 oz mounted on the rear.

The LX seems a little front heavy with anything over 25" out front....I added some weight to the rear but that made the entire bow way to heavy and fatigued my arm.

Just a need a little input on this, front heavy or perfectly balanced

Thanks
 

·
Registered
Joined
·
437 Posts
Baker4,

I had great success using a 18"-22" front stabilizer on my LX. I shot 3D with it and indoor spots. The bow would just sit in my hand. I know what you mean about front heavy with longer stabilizers. I remember well! I hope this helps.
 

·
Registered
Joined
·
1,829 Posts
Discussion Starter #3
I've got a 25" stab that I used for 3-d and it seemed to lack the stability, but any longer would make it to front heavy.

I tried the v-bars and needless to say I couldn't find a happy medium.

May wind up using a slightly longer offset.
 
1 - 3 of 3 Posts
Top