How many strands are cut?

 

I think like 3 or 4 but I’m not sure

 

Order from threadz and you will have new string set in a couple days

 

Honestly if thats all I see Im going to shoot it if the peep rotates Ill hang it till I get new threads if not I would hunt with it till threads come in.

 

Yep order another and keep hunting. Replace it the first time you can't hunt for a few days or the weather gets bad. If things go well you'll only have to draw it back once.......

 

Be a good reason to start keeping your old strings as backup, just in case. I always swap my strings out when i buy a new bow and keep the old/factory strings as backup. Thus there's no long down time.

 

Ouch! Good reason to have a backup bow to keep you going. At least you know your broad heads are sharp!

 

Time to buy a new bow and keep that one for a backup.

 

I like the way you think lol

 

No way I'd stop hunting for that.

 

My current string is significantly worse lol

 

Start measuring your peep height , dloop height, ata. It will be quicker to set back up. I use a bow square and measure everything making marks with a metallic sharpie on the bow square

 

I’ll measure my d loop, I don’t use a peep

 

Each strand is approximately 100lbs. Is the picture shown why you won’t continue cuz that’s nothing. I wouldn’t even replace those, let it settle and keep shooting.

 

I bought new strings, not gonna risk blowing up my bow

 

Factory elite strings are made by threadz. If you still have those to use

 

It was a good reason to take the ole PSE DNA SP out and get it dialed back in. Got it sighted in and shooting broadheads with fp’s in about 30 minutes after school. If that bear didn’t have cubs today you could’ve put it to use. Once the new string comes in we’ll have that on and dialed back in no problem. I’ve been using Archeryshack strings for a long time so that’s who we ordered from. The PSE is a bad little bow for the time being.