[jgreg]

I have allegiance vft 05 model 29" draw, Stamped on cam or module is E3 which I am told is a 29'" draw I need possibley 28 or 28.5 draw and using a loop. I need explaination (simple as possible) and pics if possible of what I need to change to shorten draw lenght (cam, module or both) This is a new bow for me and I do not know much about it. Appreciate your help :embara:

 

[PodunkArcher]

you need to change the whole entire cam...take it to a local proshop and have them order cams should only take like a couple weeks and costs about $60ish dollars

 

[MuskyTrap]

I believe you can change a half of an inch on the 05, but you go down to 65% let off. The only way you can change the length is by doing whats stated above.