Archery Talk Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
348 Posts
Discussion Starter #1
Looking at the new Bowtechs with the string supressor built into the riser above the string loop - what do you do for your kisser?

looking at them and thinking, thanks
 

·
Registered
Joined
·
2,715 Posts
If you have to have a kisser, just remove the factory ss & hardware and get a string tamer that mounts under your grip...if not, maybe you could use a peep sight instead and keep the factory setup....I'm a peeper guy myself.
 

·
Registered
Joined
·
1,700 Posts
I shoot a kisser on my 101st at 1.75" above nocking point. I use a neet eliminator button an have had no problems. Any higher than 1.75" and there will be issues with the SS.

Speed is in the signature on a fully loaded hunting setup.

Marc:darkbeer::):darkbeer:
 

·
Registered
Joined
·
1,045 Posts
Kisser

Do yourself a service and at least try some shooting without it. I did it kicking and screaming but I really do shoot better without it. I'm a believer now.
 

·
Guipago
Joined
·
3,088 Posts
I pull my nock set to the corner of my mouth like a kisser button.

 

·
Registered
Joined
·
2,715 Posts
interesting way to get that driver hooked up!
 

·
Registered
Joined
·
2,117 Posts
Kisser's work well on the Airbornes. They come off the string with almost the same speed as the arrow. The only problem is trying to aim them down range instead of back at your forehead!
 
1 - 7 of 7 Posts
Top