Archery Talk Forum banner

Brace Hight PSe Stinger Extreme

465 Views 4 Replies 2 Participants Last post by  Bowstring72
With my pse stinger I can't get to the 7" brace height. It is 7.5" with the limb screws fully screwed in. AtA is okay. What can I do?
1 - 5 of 5 Posts

· Registered
21,466 Posts
The brace height is only 7 1/8" so you're not far off. Also, since it's just an approximate measurement, it doesn't really matter. You can check and see that you're hitting the max draw weight and if you are, you don't really have a problem. If your draw weight is low, twisting the buss cable will increase the draw weight and the brace height.
  • Like
Reactions: Bowstring72
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.