Archery Talk Forum banner
21 - 40 of 89 Posts
Discussion starter · #22 ·
My Bowtech Reckoning with a Hamskea will knock me right in that spot if I use a very loose grip. It kind of falls backward on the shot. I've been living with it but I could see how someone would bruise there.
I think I would fall under the “light grip” category. I shoot with a lot of pad pressure and very light touch on the front of the riser. I don’t shoot with a wrist strap or anything so that probably Adds to the bow falling back
 
not sure why you think she is anemic… I see no signs of anemia…
Bruising is a symptom of anemia, it’s fairly common. I’m not a medical professional and I’m not diagnosing her.

 
Discussion starter · #24 ·
Some were able to adjust the rest and get rid of the Hamskea Hand. Some were not and went to a different rest. Good luck, and find what works for you. Ignore anyone that tells you to adjust your grip to accommodate the rest. If you adjust your grip, it should be because youre unhappy with your grip or your shooting, not to accommodate a rest that hits your hand.
Definitely with you there. I don’t think believe it’s my grip at all. I’ll test out some more front stab weight and see if that helps. Thanks for the tips!
 
Had the same issue with an Epsilon on a Mathews when shot with side plates instead of the Engage grip. Good rest it just didnt jive with me on that bow. So I switched to a Vapor Trail GI8X and problem solved. Yet on a PSE I have a Hamskea Hybrid Hunter and it works fantastic with no hand contact.
 
XXXXXXXXXXXXXXXXXX
Would like to see the rest on the bow - undrawn.

Like above noted, seems Hamskeas do whack the hand. Like another noted, moving the rest forward may help. The launch arm should well clear the shelf when down. Check arrow to berger hole. Center of shaft should be centered to berger hole or center of shaft no higher the top of berger hole.
 
Bruising is a symptom of anemia, it’s fairly common. I’m not a medical professional and I’m not diagnosing her.

I see a lot of anemic patients who don’t bruise. Additionally, her nail beds are pink and her skin color does not suggest anemia. I would rule out the most common and likely causes before I start an anemia work up. Medications, trauma, family history, aging skin etc are higher on the differential than anemia which can be caused by so many illnesses.
 
My wife had the same issue when she first started shooting. Had the same Brooze and complained of the joint hurting. Couple months into shooting it just stopped happening. I never did figure out a cause it just stopped happening
 
probably rest....this can happen from joint trauma though

i have something called morton's toe (2nd toe longer than big toe) and it causes too much force to go on the weaker toe rather than where it should be (on big toe)

anyways, twice in my life I've pushed off the ground hard and i got a really bad bruise at the base of the 2nd toe from the joint popping and blood being released

just something to keep in mind
 
  • Like
Reactions: cflann
I believe they call that Trinity Thumb!?

Well if they aren't calling it that, they should be cause thats what a Hamskea Trinity will do on most target bows.... :D I have the same issue with my Trinity on my TRX36
 
  • Like
Reactions: rwk83 and cflann
Reduce the angle of the rest blade, using the bolts under the rest, this will flatten the blade some, this way you can move the rest up 3-5mm, then work on stab balance to slow / stop the rapid top of bow backwards reaction, this may need a weight forward bias.
This is what I did and it solved the issue very quickly.
 
Reduce the angle of the rest blade, using the bolts under the rest, this will flatten the blade some, this way you can move the rest up 3-5mm, then work on stab balance to slow / stop the rapid top of bow backwards reaction, this may need a weight forward bias.
This is what I did and it solved the issue very quickly.
To add to this.

There are 2 bolts under the rest. The bolt furthest forward towards the target might have a thin washer under it. Remove the washer and it will let the bolt thread in further to the rest and move the blade's resting position up a few degrees.
 
I believe they call that Trinity Thumb!?

Well if they aren't calling it that, they should be cause thats what a Hamskea Trinity will do on most target bows.... :D I have the same issue with my Trinity on my TRX36
Hamskea Hand and Trinity Thumb. Both excellent names for the problem going on. It might be adjustable enough, or might just need a different rest. No harm either way. There is harm in shooting it as is though. Time to move on to the next. Too many good rests out there to fight this issue.
 
One should not add weight or length to stabilizer to "fix" this issue. If the shooter's style (high wrist, grip, etc.) is not compatible with the rest, the rest should go. If you change anything else, you will start chasing your tail. keep everything the same and change rest. I would recommend a QAD HDX. I should high wrist, with open palm, let the bow kick at the shot, and never had this issue. However, there are some bows where the riser rubs above the thumb knuckle, the first generation of PSE Carbon bows come to mind, one reason I stayed away.
 
21 - 40 of 89 Posts