[nogg]

on both of my sons micro midas' the cable seems unusually loose at the ends that connect to axle.Also when drawn the string is off to one side of the cam.The draw weight is down all the way.

 

[Deezlin]

You need to get the Axle to Axle dimension and Brace Height information and check these dimensions. If they are not too sever then you should be able to twist the string and cables back to specifications. If they are way out then the strings and cables need to be replaced.

 

[EXTREME 1]

If its the Micro Midas III then I can get you the specs off my sons bows. ATA is 32in
and brace is 6 1/2in the string length is 56.43in and the cable length is 33in.

 

[nogg]

ron, they are micro midas 3,thanks for specs.deezlin,brace height measures 6 3/4,ata measures 31 3/8on one and 6 1/2 , 31 3/8 on the other.I don't know how to twist the string.If you can give me some help I would appreciate it.These bows are a couple months old only so I don't think they've stretched,I suspect they've been like this but I had'nt noticed it til recently.