Archery Talk Forum banner

Cam lean?

426 Views 3 Replies 2 Participants Last post by  Bbd16
Elite ritual...
I have very little cam lean at rest but massive cam lean at full draw.
um...why Is that?
1 - 4 of 4 Posts

· Registered
Joined
·
2,990 Posts
Elite ritual...
I have very little cam lean at rest but massive cam lean at full draw.
um...why Is that?
Bc that’s how the system works. You have very little load on your cables at rest. When that load is transferred into the cables at full draw it causes torque in the riser as well as torque on both axles therefore leaving you with cam lean. Normal stuff
 

· Premium Member
Joined
·
156 Posts
Discussion Starter · #3 ·
I Dont think that is it.
i had shimmed it way to far.
new shim spacing has fixed it.
now i have i tiny bit left at rest and almost none at full draw.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top