[hoyt6190]

Just picked a hoyt defiant turbo up. One of the screws that you loosen to adjust the mods seems stripped same with one of the draw stops. Does anyone know where to get replacements or do I need to contact Hoyt?

 

[SHPoet]

Any hardware store should be able to help. Just take one of the originals along with you to verify size and thread.

 

[rick prather]

Seems odd that the screw is stripped as it is steel and the cam/mod is aluminum.
Could be the thread are filled with aluminum. Check the threads in the cam/mod carefully, even use a magnifying glass.
If the cam/mod threads are stripped, it may be possible to go to next size up.

 

[kballer1]

Probably the allen head is rounded out.