Archery Talk Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
Having a hard time getting my newly acquired compound bow dialed in. Driving me crazy.

Martin Sceptor 4, Furious cam system with Shoot through, AAE Cavalier Free Flyte rest.

Bow is shooting low.

1) Arrow Rest is in free flight mode and I have ruled out fletching contact.
2) Nock has been adjusted down to 0" with slight improvement but still shooting low.

I have the bow limbs dialed back 5 bolt turns to 55 lb setting and based on my exact rotations of the bolts the limbs should be in the same position.

I have examined the cams today and it appears that the they are slightly out of alignment.

My next plan of action is to rotate one of the limb bolts slightly until the alignment is corrected.

I figured that should correct the cam alignment, however, I believe this will affect the tiller since the limbs would now be set at different poundages.

Can anyone help me? Im feeling frustrated. Cant figure it out. Please help.

Thanks in advance!
 

·
Registered
Joined
·
9,678 Posts
You need to tune with the cables not the limbs. If you can't do this you may have to send it to someone who can.
 

·
Registered
Joined
·
5,035 Posts
Correct you tune with a press set the poundage and work the cables to get the cams in postition. Seems you need to go to a shop
 
1 - 3 of 3 Posts
Top