[LA Archer]

I was wondering how many of you shoot the carbon express 3D select arrows for 3D? Also what is the diameter of the shaft and what do you think about them? Are they pretty tough, consistent weight, and straightness? Also can you get a nock bushing so you can shoot easton or Beiter nock? Thanks

 

[bow4life]

My CX300 Selects are .292 OD and accept uni bushings

 

[shooter07]

i shoot them (the 100s) and like them alot... they are very durable and consistant... their diameter is .284 or at least for the 100s....

 

[shooter07]

another good 3-D arrow is the CXL Select... i am going to these as primary and 3-D selects as wind arrows... or at leat i think that is what i am doing the CXL selects are just fatter.... another note... Ginger morehead shoots the 3-D selects won the classic with them this year.....

 

[LA Archer]

Thanks! I might try them, I am undecided between Carbon express 3D select and CXL select and Gold Tip UL pro 22's and UL pro X-cutters.

 

[LA Archer]

ttt

 

[442fps]

If you are looking for a fat shaft , go with the GT 22 Ultralite Pro .
I can take a dozen bundle , make them ready to shoot , and within the last 6 dozens that i had there was not ONE flyer .Spine , straightness , weight tolerance , everything a bit better than the CXL's .
If you are lookin for a smaller diameter shaft , i would go with the UL Pro 400 from GT , same things than above ,Spine , straightness , weight tolerance , the CX 3d Select is far away from the GT .

 

[avid3d]

even though they're not made in america, cx shafts are far and away my favorites for 3d. they group for me better than any carbon shaft i've ever shot. i recently sold my ace's and ordered medallions for field/fita in '05.

if you get some, put unibushings in them and use g-nocks. then they hold up great.

avid3d

 

[PSI-2]

You might also check the Beiter website...

http://www.wernerbeiter.com/english/produkte/in-nocke.html

They might have a nock that will fit the shaft without requiring a bushing.

 

[Tallcatt]

2005 Carbon Express

The CXL series for 2005 has a new nock that offers more protection to the nock end of the shaft. It incorporates a bushing and a Beiter nock. They have also made some improvements in the strength of the CXL shaft. They have also introduced a LineJammer 250 that I think will be popular with the 3D crowd.

 

[LA Archer]

A linejammer 250 might be nice. I looked at their web site last night and there wasn't much info. Thanks!