Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
132 Posts
Discussion Starter #1
Does anyone know if there is any points besides Carbon Tech that fits McKinney 188 (generation I) shafts? I was hoping there would be some Easton point I could use. If not is there anywhere that still sells Mckinney points?
 

·
Registered
Joined
·
1,309 Posts
The "gen 1" Mckinney shafts had points designed for the shafts.

The new Mckinney shafts ( if I remember correctly this is gen 3) use the Easton A/C/E points or inserts.

You may find points for the 188 from CT.

Good luck

Stan
 

·
Archery Coach
Joined
·
23,292 Posts
ksarcher said:
The "gen 1" Mckinney shafts had points designed for the shafts.

The new Mckinney shafts ( if I remember correctly this is gen 3) use the Easton A/C/E points or inserts.

You may find points for the 188 from CT.

Good luck

Stan

there actually has been three generations of CT Mckinneys.-they respined them a while back-I shot 210's (first generation-I think 196 was the later version). I bought lots of his cheap target shafts for my range (cheap 196 used the same nocks and could use the same points as the CT M). I think I got most of the remaining target stuff. I will look at see if I have an extra dozen points
 
1 - 4 of 4 Posts
Top