Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter #1
I recently got a Carnivore 31 with no strings or cables. I ordered a set and put them on best I could from photos on here and elsewhere. I read the manual for timing. It states that the "dots" are used for timing, and that the 31 has 9 of them below the limb. I set the bow up this way. At full draw, there seems to be a problem. I think the top cam over rotates. I have added photos of the bow static and at full draw as well as the cams, top and bottom, static and at full draw.
Hopefully someone on here can let me know if I have routed the cables wrong or at least tell me if this is just how the cams rotate. Other bows tend to have some way of registering if the cam has rotated enough, ie.. cable stops. Top cam doesn't seem to have this. You'll also notice in the full shot that the top of the bow cants forward a lot. Any thoughts would be appreciated.
 

Attachments

·
Registered
Joined
·
1,043 Posts
Sent PM

Cams are off/timing!
 
1 - 4 of 4 Posts
Top