Archery Talk Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
719 Posts
Discussion Starter #1
I got a Centerpoint Mercenary 390 from a fellow ATer for a friend of mine. He has it dialed in at 20 yds and shoots consistent groups BUT when he shoots farther the groups get to be 10-12 inch groups. He is pulling the bow evenly when cocking. What else could he check to resolve the issue? Any help would be appreciated.

Thanks, Dennis
 

·
Registered
Joined
·
6,434 Posts
Ck all screws includin limbs. Ck to see if'en it timed on the cams correctly. Ck scope/rings n arrows
 

·
Registered
Joined
·
8,847 Posts
If he has another scope put it on and see how it shoots. Probably a bad scope. If not like Mike said, check the screws. etc.
 

·
Registered
Joined
·
1,710 Posts
To check if it's an arrow issue, have him shoot just one arrow repeatedly and see if he still gets large shot pattern or if it's a small small shot-pattern. Small pattern, it's the arrows. Large pattern, look for issues with the bow or scope.

Good luck.
 

·
Registered
Joined
·
3,913 Posts
Scope not leveled accurately. Is it shooting to one side or the other.
 

·
Registered
Joined
·
719 Posts
Discussion Starter #7
1 - 7 of 7 Posts
Top