Archery Talk Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
122 Posts
CPS Tuning

I've had problems with CPS Cams going out of time after the string and cables sets in. Mostly I've seen nock high tears. Check the brace height and make sure it's even. You will need a bow press to set the the cams to their tuning positions and twist or untwist the cables to get the cables into the timing marks. You can download the instructions for Dartons website. Don't beleive that CPS and Cam.5s don't need to be timed. Have fun and don't pull all your hair out!;)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top