I was wondering if any has done a DIY deer feeder? I'm looking to make one out of a 5 gallon bucket. I seen one at walmart that was just the bucket with a stick that hangs out the bottom. Was looking to make something like that. Anyone have any ideas?
Horses&Hunting
I started using feeders last summer, I ended up building 2 feeders for alot cheaper than I could have bought them, it took less than an hour to build each one and they have worked great. I was planning on fabricating a lid and leg brackets but ended up just buying them.
You can get heavy duty 55 gallon plastic drums for free from places like dog kennels, animal hospitals, factories,
car dealerships etc.
Any place that buys soap in bulk to clean floors etc. Pike
55 gallon drum = free
Camo paint job by 7 year old daughter = $3.00
American Hunter photo cell feeder kit from Ebay = $20.50
American Hunter leg bracket kit from TSC = $15.00
American hunter stainless steel lid from TSC = $15.00
Three 7 foot stainless steel fence post's from Lowes = $24.00
Total = $77.50
![Image]()
![Image]()
![Image]()
You can get heavy duty 55 gallon plastic drums for free from places like dog kennels, animal hospitals, factories,
car dealerships etc.
Any place that buys soap in bulk to clean floors etc. Pike
55 gallon drum = free
Camo paint job by 7 year old daughter = $3.00
American Hunter photo cell feeder kit from Ebay = $20.50
American Hunter leg bracket kit from TSC = $15.00
American hunter stainless steel lid from TSC = $15.00
Three 7 foot stainless steel fence post's from Lowes = $24.00
Total = $77.50
since weight isn't a factor I would just hang it from a overhead branch and purchase a photo cell feeder
I had 5 of those blue drums. But was moving so gave them away. I will have to see if I can find one. If I use a plunger it won't let out too much corn will it? I would just cut a small hole in the bottom of my bucket and then put the plunger through right? Making sure I get it right. Only have one bucket to work with lol. Thanks for the tips.
We just take a 5 gal bucket, cut the center circle out the bottom (you'll know what I'm taking about when you turn one over) and put a forked stick in it abotu 3 foot long.
Used them for years before I ever got an electric feeder.
Used them for years before I ever got an electric feeder.
you mean one like this one?
http://www.archerytalk.com/vb/showthread.php?p=1665727&highlight=feeder#post1665727
http://www.archerytalk.com/vb/showthread.php?p=1665727&highlight=feeder#post1665727
Yep just like that.
I cut the bucket last night and found and new plunger from the old house. Don't worry its not used lol. Should I paint my white Spackle bucket? I was told it would be ok to leave it like that. I plain on using some sweet feed that was left over from the horses. Has corn in it, so it should work. Thanks for all the tips guys.
I cut the bucket last night and found and new plunger from the old house. Don't worry its not used lol. Should I paint my white Spackle bucket? I was told it would be ok to leave it like that. I plain on using some sweet feed that was left over from the horses. Has corn in it, so it should work. Thanks for all the tips guys.
cheap pvc feeder
I just made a gravity feeder- got the directions from a friend who got the idea off an old post on here. Here is what you will need a 4" section of pvc (they come in like 10' sections), a 4" cap, a connection that branches off at 45 degrees (think its just called a 45 not sure though), and a drain cap. here is what you do- cut the long pvc in half (now its roughly 5'). On one end of that is where your cap will go (dont glue the cap on-this is where you will load your corn). On the other end glue on the 45. On the bottom of the 45 glue in the drain. Leave the angled end of 45 open- the deer will eat from here. Boungie cord or screw feeder into tree and fill tube with corn- put cap back on top. The drain in bottom will allow any water that may get in to leak but wont allow corn to fall out (keep cap on to help keep water out). Deer will eat from 45 and corn will fall as they eat. I just set mine up last week so havent went back for my trail camera pics yet. My buddy used it last year and had great success he now swears by it. It only cost like $20 and only took like 10 mins to build. I made 2 of them from the one 10' pvc piece and together they held a whole bag of corn. Dont have any pics right now as im in florida and feeders are now in georgia- i will see if my buddy has pics of his so i can get you guys some photos. Hope this helps
I just made a gravity feeder- got the directions from a friend who got the idea off an old post on here. Here is what you will need a 4" section of pvc (they come in like 10' sections), a 4" cap, a connection that branches off at 45 degrees (think its just called a 45 not sure though), and a drain cap. here is what you do- cut the long pvc in half (now its roughly 5'). On one end of that is where your cap will go (dont glue the cap on-this is where you will load your corn). On the other end glue on the 45. On the bottom of the 45 glue in the drain. Leave the angled end of 45 open- the deer will eat from here. Boungie cord or screw feeder into tree and fill tube with corn- put cap back on top. The drain in bottom will allow any water that may get in to leak but wont allow corn to fall out (keep cap on to help keep water out). Deer will eat from 45 and corn will fall as they eat. I just set mine up last week so havent went back for my trail camera pics yet. My buddy used it last year and had great success he now swears by it. It only cost like $20 and only took like 10 mins to build. I made 2 of them from the one 10' pvc piece and together they held a whole bag of corn. Dont have any pics right now as im in florida and feeders are now in georgia- i will see if my buddy has pics of his so i can get you guys some photos. Hope this helps
Same type principle, use a toilet flange bolted to the bottom, approximately 30 Inches of 4" pvc pipe, leg kit, fence posts, make a disk "7 diameter out of 3/4 ply or similar material and suspend it 1/2" below the pipe with 3 piecesof metal straps 12" long. Secure them with screws but don't tighten them all the way, it should move freely. The deer will shift the plate, they'll eat what falls and will leave very little or no feed for the ***** or squirrels. Holds about 335 lbs.
Attachments
Very cool. So how long does it take til the deer come to the feeders? I made a thread but got no responses. We use to see deer out back all the time. When we put up the electric fence for the horses they don't come around anymore. I put up one feeder in the back where they were coming out from. Have had no hits on that one at all. I put one out front where the doe and fawns were. But no hits on that one. Did I waste my time or does it take awhile for them to find my feeders?
The PB trick normally works. I takes them a bit to get used to it if they haven't ever seen a feed like this before. Around here all the cheap ******** use them so I think the deer are used to them by the time they are walking good.
Another idea for a 5 gallaon bucket is:
Take 5 gallon bucket, and cut four triangles on the bottom edge of the bucket(You'll actually have a triangle cut on the side of the bucket and bottom). you can make the angle as big as you want to allow as much or as little as corn to flow out. Then take a piece of 12"x12" plywood and screw it into the bottom of the bucket. Screw up into the bucket , so the deer don't get stuck in the face with the tip of a screw. tie a rope to the handle of the bucket and hang from a tree. Fill with corn and put on the lid. You now have a "bump" feeder.
Take 5 gallon bucket, and cut four triangles on the bottom edge of the bucket(You'll actually have a triangle cut on the side of the bucket and bottom). you can make the angle as big as you want to allow as much or as little as corn to flow out. Then take a piece of 12"x12" plywood and screw it into the bottom of the bucket. Screw up into the bucket , so the deer don't get stuck in the face with the tip of a screw. tie a rope to the handle of the bucket and hang from a tree. Fill with corn and put on the lid. You now have a "bump" feeder.
I tried this bucket feeder with my blacktails. peanut butter on the stick a small catch basin on the stick that the feed landed into everything I could think of to get them to bump the stick. Nothing seemed to work. They just would not use it. I don't know perhaps blacktails are just too timid or stupid but after an entire year of trying I went with the dear attractant blocks. they worked really well but I admit they are a bit pricey.
![]()
Also what I found was that although the deer weren't using them within 3 months the rats and squirrels had completely destroyed the plastic barrel chewing holes through them in multiple places. So my deer refused to use it and adding insult to injury the feeders were destroyed. Once the the holes were chewed through the grain got wet and moldy eventually even the squirrels wouldn't eat it.
I suspect that my experience is some what unique because a lot of people are talking about them but they didn't work for me I'm thinking of trying the PVC pipe gravity feaders next:
http://www.archerytalk.com/vb/showthread.php?t=2098899&highlight=PVC+pipe+feeder
The blacktails don't seem all that interested in anything that doesn't have molasses in it and I'm thinking that might not work real well in a gravity feeder. I'b be interested in hearing others thoughts on it.
Also what I found was that although the deer weren't using them within 3 months the rats and squirrels had completely destroyed the plastic barrel chewing holes through them in multiple places. So my deer refused to use it and adding insult to injury the feeders were destroyed. Once the the holes were chewed through the grain got wet and moldy eventually even the squirrels wouldn't eat it.
I suspect that my experience is some what unique because a lot of people are talking about them but they didn't work for me I'm thinking of trying the PVC pipe gravity feaders next:
http://www.archerytalk.com/vb/showthread.php?t=2098899&highlight=PVC+pipe+feeder
The blacktails don't seem all that interested in anything that doesn't have molasses in it and I'm thinking that might not work real well in a gravity feeder. I'b be interested in hearing others thoughts on it.
Just thinking out loud to Bullseye31's question:
What if we started with the standard PVC tube feeder. Vertical tube with a Y installed on the bottom. If you use 6", or even 8" PVC they hold a lot and the deer can easily eat from them. See the attached pic.
Mount the feeder high enough so that deer could still reach, but a **** would have to crawl up on it.
Mount it on a smooth metal pole so the **** can't hang from the pole as easily.
There would then need to be some type of "cap" that was lever attached to a ring all the way around the feeder opening. Think of it like fixing a toilet cover at a 90 degree "L" angle to the toilet seat. A small spring or even piece of elastic would keep the lid vertical and the seat horizontal surrounding the bowl.
As the **** tried to climb on the feeder, and the grabs any part of the ring, it would hinge the lid down and cover the feed.
The deer would eat out of it without any need to touch the ring at all.
Alright, someone else's turn to chime in, modify or start a new idea.
Mitch
What if we started with the standard PVC tube feeder. Vertical tube with a Y installed on the bottom. If you use 6", or even 8" PVC they hold a lot and the deer can easily eat from them. See the attached pic.
Mount the feeder high enough so that deer could still reach, but a **** would have to crawl up on it.
Mount it on a smooth metal pole so the **** can't hang from the pole as easily.
There would then need to be some type of "cap" that was lever attached to a ring all the way around the feeder opening. Think of it like fixing a toilet cover at a 90 degree "L" angle to the toilet seat. A small spring or even piece of elastic would keep the lid vertical and the seat horizontal surrounding the bowl.
As the **** tried to climb on the feeder, and the grabs any part of the ring, it would hinge the lid down and cover the feed.
The deer would eat out of it without any need to touch the ring at all.
Alright, someone else's turn to chime in, modify or start a new idea.
Mitch
Attachments
Mitch.. Good idea.. How much Fred could that hold.. My hinting area is 6 hours away..and would need at least a couple hundred pounds at minimum to b able to keep it maintained.. Also.. What type of lid did you have in mind.. Or rigged lid would do such thing.. I like the idea just having trouble picturing how it would work.. Thanks for the help!
I think my toilet seat analogy is the best visual I can come up with.
Think of the toilet seat going around the outside of the bow. The lid is welded to the seat at a 90 degree angle. The two are attached to a hinge pin right where they are welded together. They basically make a "L" shape.
The the **** tried to climb up on the feeder, he would grab and pull on the toilet seat. This would cause the toilet seat to swing down and thus the lid (still at the fixed 90 degree angle) to swing down and cover the feed opening. I can try to draw something up tonight and post it. I think it will need to be a little tighter than a 90 degree angle, but the visual is the same.
A piece of elastic or a spring would return the seat to a horizontal position (lid would then be vertical and not covering the feed) as soon as the **** let go.
The "lid" could just be a piece of heavy sheet metal, 1/2" plywood, etc. For the ring that goes around, I was visualizing a piece of rebar bent in a U shape, but it might need to be more like the toilet seat. Maybe 2" wide so that the **** can't reach around or under it to get a hold of the edge of the feeder.
Looking at volume, the options are endless.
An 8" diameter x 4' high pipe holds about 1.4 cubic feet.
You could certainly go taller if you had a way of dumping your feed into the top. I don't think I'd want to go larger than 8 for the opening or the **** might be able to sit in the feet mount. That doesn't mean you couldn't use a larger pipe and just neck it down though.
A 12" diameter by 4' high pipe holds about 3 cubic feet.
Pie x R squared x height if you want to figure out any other volumes.
Just for reference, 1 cubic foot of corn is just over #40 and I couldn't find mineral weight, but granular sugar is just over #50.
Mitch
Think of the toilet seat going around the outside of the bow. The lid is welded to the seat at a 90 degree angle. The two are attached to a hinge pin right where they are welded together. They basically make a "L" shape.
The the **** tried to climb up on the feeder, he would grab and pull on the toilet seat. This would cause the toilet seat to swing down and thus the lid (still at the fixed 90 degree angle) to swing down and cover the feed opening. I can try to draw something up tonight and post it. I think it will need to be a little tighter than a 90 degree angle, but the visual is the same.
A piece of elastic or a spring would return the seat to a horizontal position (lid would then be vertical and not covering the feed) as soon as the **** let go.
The "lid" could just be a piece of heavy sheet metal, 1/2" plywood, etc. For the ring that goes around, I was visualizing a piece of rebar bent in a U shape, but it might need to be more like the toilet seat. Maybe 2" wide so that the **** can't reach around or under it to get a hold of the edge of the feeder.
Looking at volume, the options are endless.
An 8" diameter x 4' high pipe holds about 1.4 cubic feet.
You could certainly go taller if you had a way of dumping your feed into the top. I don't think I'd want to go larger than 8 for the opening or the **** might be able to sit in the feet mount. That doesn't mean you couldn't use a larger pipe and just neck it down though.
A 12" diameter by 4' high pipe holds about 3 cubic feet.
Pie x R squared x height if you want to figure out any other volumes.
Just for reference, 1 cubic foot of corn is just over #40 and I couldn't find mineral weight, but granular sugar is just over #50.
Mitch
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
