Archery Talk Forum banner

Double Bull hub won't stay out?

4654 Views 4 Replies 5 Participants Last post by  GSLAM95
I recently purchase a Double Bull blind. On one side it seems the hub doesn't pop out or won't stay out unless it is tied off. The other three hubs are fine. What could cause that? Thanks
1 - 5 of 5 Posts

· Registered
Joined
·
2,387 Posts
Loose

The fabric is to loose. Tighten the cords on the outside some, and make sure you tighten the straps on the inside. There just isn't enugh tension to keep it popped out.
 

· Vendor
Joined
·
85,248 Posts
blind

Bartman is right .It needs to have pressue to stay in place. They must not done it right at the factory.But its no big deal. Once you get that right it will be just fine!
 

· Registered
Joined
·
8,159 Posts
Tension adjustment on one of the straps. If you are still having difficulties please shoot me a pm with your # and I will gladly call and walk you through getting it adjusted. :thumb:
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top