Archery Talk Forum banner

Draw Length Change Effect Timing?

581 Views 3 Replies 3 Participants Last post by  SpotShy
I just shortened my draw length on my 09' Captain by a 1/2". I moved the mod and draw stop post to specs. on the mod chart. My question is, will the timing change are there any other adjustments I need to make?

Thanks in advance
1 - 4 of 4 Posts

· Registered
Joined
·
37 Posts
I doubt that changing draw length would change timing because you havent changed anything on your cable length.you will have to change your draw stop, youcan the info on bowtechs site(I believe it is under something like draw post settings)I would still double check at full draw

Mark
 

· Registered
Joined
·
768 Posts
If the cams were in time to begin with then they should still be in time. But as pd stated you will need to re-position your draw stop or else the draw sops will be getting into the cables. It's a deal were you can't do one without the other.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top