Archery Talk Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
759 Posts
Check out mcmastercarr.com

Search their site for "inserts for wood".They have several different types.The standard mounting screws that come with a sight are a 10-24 thread.As far as installing the inserts it is a pretty easy process.The correct drill size for the insert is usually stamped on the insert itself(depending on manufacturer).If you do acidentally drill the hole too big ,some 24 hour epoxy can fix it right up.Use your sight bracket as a template.Work slowly and as accuratley as possible and you should have no problem.Same goes for the rest insert.Good luck
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top