Archery Talk Forum banner

1 - 3 of 3 Posts

·
EXTREME BOWSTRINGS
Joined
·
11,626 Posts
I have been using the Limb Driver for about 4 years and it is the easiest to set up. No more attaching the cord to the down cable and trying to figure out the exact spot to put it for timing of the rest to come up or release. Also with the limb driver if the cord ever comes loose it becomes a launcher rest but what is even better I carry extra cord with me so I cam make a new cord if needed. And again no problems with trying to figure out the timing issue or where to attach it. Just run the cord through the hole in the limb connector and through the hole in the bracket on the rest, tighten set screw and your done. On the ripcord if the cord comes loose sure the prongs can stay up but see what happens when you shoot with it in the up position. Also the limb driver drops faster since its attached to the top limb. Limb Driver all the way.
 

·
Registered
Joined
·
14,506 Posts
i see your pretty net to forums, try a search for the same question you asked and youll find a TON of previous threads about same topic

QAD HD
 
1 - 3 of 3 Posts
Top