Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
86 Posts
Discussion Starter #1
Please forgive any mistakes, I am new to this.
I recently aquired a beautiful Scepter III.With it came 12
A/C Navigator Arrows Uncut 480.Can anyone suggest how short can I cut them?
My Draw lenght is 29 inches. Max poundage 55lbs. How many grains at tip?
Feathered,or vains. 4 inch or 3 inch.
I will be shooting Indoors 23m.and in summer outdoors.
I would appreciate the help.Or any suggestions. Thank you
John.
 

·
Registered
Joined
·
1,859 Posts
I ran specs through Archers advantage real quick and you do at least have the proper spine shafts to work with ASSUMING you are using a release.
Anywhere from 27.5 to 29" shaft length should work and you can choose your point weight - these shafts will have point weight options from 100 to 120 grains. I figured the lengths based on 100 grain pts. Do they have points installed already? if so, what weight are they?(if new do they still have the break-off sections?

Also, for outdoors, the smaller the fletching the better performance you will get in any wind you might encounter. For indoor only your idea of 3-4" fletch would be acceptable.

Let us know, Sean
 

·
Registered
Joined
·
1,610 Posts
John , I shoot a scepter lll @28 1/4" & 58# with navigator 480s cut to 27" with 110gr. points and 1.8 vanes off a tuner rest and it works for me. hope that helps....Bob
 
1 - 4 of 4 Posts
Top