Archery Talk Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
4,257 Posts
Discussion Starter #1
Does anyone know if they make a Easton Uni-Bushings that will fit into a 5575 Goldtip XT arrow. I have tried the pin knocks and the break to easy.
 

·
Registered
Joined
·
47,473 Posts
I've put CB bushings in XTs and Expeditions and they were a little loose. Too loose for the plastic bag trick. So I use low-temp hotmelt and they are awesome.
 

·
I have OCAD
Joined
·
3,531 Posts
gt are .246 and the cb bushings would be your best bet. I use the 3-60 in my carbontechs but they are way to loose for my goldtips.
 

·
Archery Talk Sponsor
Joined
·
3,548 Posts
I Used the GTs, but they seemd too brittle. Not sure if it was they got stressed too much snapping on the string...they just seemed too have too tight a fit.

You might give the Carbon Tech pin nock a try. They've worked really great for me.

The Carbon Tech pin nock have a throat size that seems a hair larger that the Easton "G" nock Large Groove (0.098).
 

·
Registered
Joined
·
5,465 Posts
AC-60 work if you use the plastic bag trick.
 

·
Registered
Joined
·
2,688 Posts
For those that need them I have the GT nock adapter for "G" nocks. or the Pin Nock adapters both from GT.
 
1 - 10 of 10 Posts
Top