Archery Talk Forum banner

Status
Not open for further replies.
1 - 20 of 30 Posts

·
Custom Bowstrings
Joined
·
18,581 Posts
Discussion Starter #1
I have a bunch of custom grip/side plates for Elite bows from Git-A-Grip I would like to sell, I bought quite a few to have a selection to pick from when I was building all my Custom Elite franken bows but now I am down to my last project so I want to sell what's left. I still have a few sets left but I still need to make my final decision on the last bow before I sell those, all grips will come with double sided tape. I do not have any other brand of bow grips and I do not make them so what you see is all I have for the moment, and I am not looking for any trades.

$40.00 a set TYD anywhere in the USA 1st Class Mail or add $3.00 for Priority Mail

Here are some pics of the grips.


From left to right here are the colors for the picture above.

1. Black/Purple/Silver Marble Swirl(The grip is dark so it is hard to pick up all the colors)
2. Blue/Yellow/Natural Wood Dymond Wood
3. Green/Redbrown/Yellow/Walnut Dymond Wood
4. Red/White/Blue Marble Swirl
5. Pearl (Pinkish white) Marble Swirl

Next set for sale


From left to right here are the colors for the second picture.

1. Black/Green Marble Swirl (Would look nice on a NVG Elite)
2. Yellow/Black/Silver Marble Swirl
3. Orange/Blue/Yellow Marble Swirl

I accept Paypal at [email protected]

Thanks for looking,

Jamie
Twisted Archer Custom Bowstrings​
 

·
Custom Bowstrings
Joined
·
18,581 Posts
Discussion Starter #2
ttt
 

·
Custom Bowstrings
Joined
·
18,581 Posts
Discussion Starter #3
ttt
 

·
Registered
Joined
·
3,425 Posts
will these fit gt500?
 

·
Custom Bowstrings
Joined
·
18,581 Posts
Discussion Starter #5

·
Custom Bowstrings
Joined
·
18,581 Posts
Discussion Starter #6
ttt
 

·
Custom Bowstrings
Joined
·
18,581 Posts
Discussion Starter #7
Update on Grips fitting Elite's

will these fit gt500?
I just received a email from Jim (jkk) from Elite and here is his reply.

From: Jim Klossner ([email protected])
Sent: Tue 11/02/10 8:59 AM
To: JAMIE SHAW ([email protected])


Yep - same grip. You should be good to go.

On 11/2/10 10:37 AM, JAMIE SHAW wrote:
Jim,

Do all the 2011 Bows have the same grip design as all previous Elite bows? I still have a couple of sets of custom grips and the carbon set I just bought off you and wanted to be sure, I guess I should of asked before I ordered but I can always use them later on.

Thanks,
Jamie
 

·
Custom Bowstrings
Joined
·
18,581 Posts
Discussion Starter #8
ttt
 

·
Custom Bowstrings
Joined
·
18,581 Posts
Discussion Starter #9
Updated grips list

I have a bunch of custom grip/side plates for Elite bows from Git-A-Grip I would like to sell, I bought quite a few to have a selection to pick from when I was building all my Custom Elite franken bows but now I am down to my last project so I want to sell what's left. I still have a few sets left but I still need to make my final decision on the last bow before I sell those, all grips will come with double sided tape. I do not have any other brand of bow grips and I do not make them so what you see is all I have for the moment, and I am not looking for any trades.

$40.00 a set TYD anywhere in the USA 1st Class Mail or add $3.00 for Priority Mail

Here are some pics of the grips.


From left to right here are the colors for the picture above.

1. Black/Purple/Silver Marble Swirl SOLD
2. Blue/Yellow/Natural Wood Dymond Wood
3. Green/Redbrown/Yellow/Walnut Dymond Wood
4. Red/White/Blue Marble Swirl
5. Pearl (Pinkish white) Marble Swirl

Next set for sale


From left to right here are the colors for the second picture.

1. Black/Green Marble Swirl (Would look nice on a NVG Elite)
2. Yellow/Black/Silver Marble Swirl
3. Orange/Blue/Yellow Marble Swirl

I accept Paypal at [email protected]

Thanks for looking,

Jamie
Twisted Archer Custom Bowstrings​
 

·
Registered
Joined
·
3,425 Posts
I don't see the second pic!!
 

·
Registered
Joined
·
3,425 Posts
Ok now I see them!
 

·
Custom Bowstrings
Joined
·
18,581 Posts
Discussion Starter #12
Buy more than one set of grips and save a little cash

I have a bunch of custom grip/side plates for Elite bows from Git-A-Grip I would like to sell, I bought quite a few to have a selection to pick from when I was building all my Custom Elite franken bows but now I am down to my last project so I want to sell what's left. I still have a few sets but I still need to make my final decision on the last bow before I sell those, all grips will come with double sided tape. I do not have any other brand of bow grips and I do not make them so what you see is all I have for the moment, and I am not looking for any trades.

$40.00 a set TYD anywhere in the USA 1st Class Mail or add $3.00 for Priority Mail

I am going to offer a combined shipping kind of thing, here is how it would run.

1 set $40.00 each
2 sets $38.00 each
3 sets $36.50 each
4 sets and up $35.00 each

I decided to do this to save both of us a little money and me some time, if I can ship more than one set to just a single address I save postage, packing and shipping supplies. The shipping options are still the same, 1st Class Mail is included in the price and if you woul like Priority Mail just add $3.00.

Here are some pics of the grips.


From left to right here are the colors for the picture above.

1. Black/Purple/Silver Marble Swirl SOLD
2. Blue/Yellow/Natural Wood Dymond Wood
3. Green/Redbrown/Yellow/Walnut Dymond Wood
4. Red/White/Blue Marble Swirl
5. Pearl (Pinkish white) Marble Swirl

Next set for sale


From left to right here are the colors for the second picture.

1. Black/Green Marble Swirl (Would look nice on a NVG Elite)
2. Yellow/Black/Silver Marble Swirl
3. Orange/Blue/Yellow Marble Swirl

I accept Paypal at [email protected]

Thanks for looking,

Jamie
Twisted Archer Custom Bowstrings​
 

·
Custom Bowstrings
Joined
·
18,581 Posts
Discussion Starter #13
ttt
 

·
Custom Bowstrings
Joined
·
18,581 Posts
Discussion Starter #14
ttt
 

·
Custom Bowstrings
Joined
·
18,581 Posts
Discussion Starter #15
Updated Grips List

I have a bunch of custom grip/side plates for Elite bows from Git-A-Grip I would like to sell, I bought quite a few to have a selection to pick from when I was building all my Custom Elite franken bows but now I am down to my last project so I want to sell what's left. I still have a few sets left but I still need to make my final decision on the last bow before I sell those, all grips will come with double sided tape. I do not have any other brand of bow grips and I do not make them so what you see is all I have for the moment, and I am not looking for any trades.

$40.00 a set TYD anywhere in the USA 1st Class Mail or add $3.00 for Priority Mail

Here are some pics of the grips.


From left to right here are the colors for the picture above.

1. Black/Purple/Silver Marble Swirl SOLD
2. Blue/Yellow/Natural Wood Dymond Wood
3. Green/Redbrown/Yellow/Walnut Dymond Wood
4. Red/White/Blue Marble Swirl
5. Pearl (Pinkish white) Marble Swirl SOLD

Next set for sale


From left to right here are the colors for the second picture.

1. Black/Green Marble Swirl (Would look nice on a NVG Elite)
2. Yellow/Black/Silver Marble Swirl
3. Orange/Blue/Yellow Marble Swirl

I accept Paypal at [email protected]

Thanks for looking,

Jamie
Twisted Archer Custom Bowstrings​
 

·
Custom Bowstrings
Joined
·
18,581 Posts
Discussion Starter #16
ttt
 

·
Custom Bowstrings
Joined
·
18,581 Posts
Discussion Starter #17
I am going to offer a combined shipping kind of thing, here is how it would run.

1 set $40.00 each
2 sets $38.00 each
3 sets $36.50 each
4 sets and up $35.00 each

I decided to do this to save both of us a little money and me some time, if I can ship more than one set to just a single address I save postage, packing and shipping supplies. The shipping options are still the same, 1st Class Mail is included in the price and if you woul like Priority Mail just add $3.00.

Thanks for looking,

Jamie
Twisted Archer Custom Bowstrings​
 

·
Custom Bowstrings
Joined
·
18,581 Posts
Discussion Starter #18
ttt
 

·
Custom Bowstrings
Joined
·
18,581 Posts
Discussion Starter #19
ttt
 

·
Custom Bowstrings
Joined
·
18,581 Posts
Discussion Starter #20
ttt
 
1 - 20 of 30 Posts
Status
Not open for further replies.
Top