Recently acquired a 2014 energy 32 and tinkered with the draw stops a bit. Well, I eventually slid them all the way back which was the original position they were in but it seems like there is a significantly smaller valley than before I moved them. I mean after drawing just a little creep and it wants to jump on me. Before I moved the draw stops there was a much larger valley. Doesn't make any sense to me whatsoever because I have the draw stops set all the way back, which should give me the biggest valley and also increase my draw length some. Any ideas as to why this could be? At first I thought I was just imaging it but I am certain there has been a change. Any help would be much appreciated. Thanks!