Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
119 Posts
Discussion Starter · #1 ·
Hi All,

Well I leaned my bow on a 4x4 post yesterday and it slid off right on a rock! Broke my arrow rest and put a small chip on the edge of one of my limbs. I would like to fill the chip area with a bit of epoxy. I don't want to mail order any ( and thus have to pay for shipping ). Has any one got any suggestions on one that might work from Home Depot or Lowes?

Thanks,

Sad Bob
 

·
Registered
Joined
·
2,408 Posts
get some loc tite 420 or gel super glue and just build up the chipped area.. from big box store Id use gel super glue and apply with finger tip and build up until chip is gone.. if it just chipped the finish a little you could get some spar ureathane or poly that matches your finish(satin etc.) and build it up the same way until chip is gone/filled in..
 

·
Registered
Joined
·
221 Posts
As stated above, super glue gel. My bower recommended Gorilla Glue Gel. 0000 steel wool very lightly to even out/ buff. This is for very small dings.
 
1 - 4 of 4 Posts
Top