[ParkerBow]

currently shooting 60lbs 27draw Elite Kure. Arrows are 6mm FMJ 390 cut down to 27inches. If I had an outsert with insert along with my 100grn tip will I weaking the spine too much?

 

[Wolfey]

How heavy of an insert/outsert? If its under 75 grains it should be fine. You could also cut an inch off your arrow to stiffen it.

Sent from my SM-G975U using Tapatalk

 

[BCH1313]

https://www.victoryarchery.com/arrow-guide/
This is a great free resource, allows you to enter point, insert, vanes, wrap, nock weights and it will calculate a recommend spine

Sent from my moto z4 using http://bit.ly/Archery_Talk_app

 

[ParkerBow]

I was thinking of cutting the arrow down to make it stiffer. My plan was another 100 to 125grn upfront

 

[Wolfey]

I was thinking of cutting the arrow down to make it stiffer. My plan was another 100 to 125grn upfront

I think it'll be a little weak even if you cut them to 26 inches.

Sent from my SM-G975U using Tapatalk

 

[ParkerBow]

Arrows would come in on the weak side. So I will just keep them as is and save some money