Archery Talk Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter #1
I have an evolve 35 and I tried to put my limb driver on it with no success, it will not clear the cable rod? Anyone run into this before?


Sent from my iPhone using Tapatalk
 

·
Time for Spots to die
Joined
·
2,087 Posts
How do you want it to clear? Is it a Limb Driver Pro V? If so, move the rest forward or back to make the activation cord clear. Post a picture if you can. I will do what I can to help you our.

Arrow
 

·
Registered
Joined
·
56 Posts
Discussion Starter #3
Hey man thanks, it’s the cable rod. I have the tea and I need to retrofit to the frs... been shooting and tuning bows for a long time and no matter where that rest is there is no where for it to clear, I’ll post pics tomorrow but yes it’s a pro v


Sent from my iPhone using Tapatalk
 

·
Time for Spots to die
Joined
·
2,087 Posts
If it does not interfere with the slide, then contacting the rod is not an issue. I will help if I can.

Arrow
 

·
Registered
Joined
·
146 Posts
if your running into the" micro- adjusting nut" on the top you can remove it from the screw and install it on the bottom. that should give you enough clearance. hope this makes sense..
 
1 - 5 of 5 Posts
Top