Archery Talk Forum banner

firecat question ?

307 1
i have a 2008 firecat that has about 500-600 shots threw it , just noticed that the bottom draw module is touching the cable and my spacer is loose , you can spin it around the axle is this typical of these cams or do i have a problem? the bow shoots fine , groups well but i am concerned about the contact any help is appreciated thanks
1 - 2 of 2 Posts

· (aka lug nut)
Joined
·
54,880 Posts
i have a 2008 firecat that has about 500-600 shots threw it , just noticed that the bottom draw module is touching the cable and my spacer is loose , you can spin it around the axle is this typical of these cams or do i have a problem? the bow shoots fine , groups well but i am concerned about the contact any help is appreciated thanks
Take the bow into your proshop for a quick checkup.

There should be no side to side (left to right) gaps on the axle.

Not sure what you mean by "...my spacer is loose...".
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top