Archery Talk Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter #1
So I was wondering what everyone did with fletching... Did you guys/gals use the fletching the arrows come with in a package, do your own, or have none? If you do your own, do you use 2", 3", or 4" vanes? Also, do you use helicals, and if you do what approximate/exact degree do ya use? :darkbeer:
 

·
Registered
Joined
·
29 Posts
Discussion Starter #3
I use Blazer vanes usually straight but have been playing with the 3 degree helical blazer jig from bohning!
How's the 3 degree working out? I watched a video saying that helped out greatly.
 

·
Registered
Joined
·
520 Posts
I use a bitzenburger right helical, with Flex Fletch Silent Knight 300 vanes. Really loving them so far. I'm not a real big fan of Blazers.
 

·
Registered
Joined
·
1,239 Posts
I use 2" fusions fletched with a right helical clamp on a bitz, I also use a much offset as I can with both ends of the vanes still contacting the shaft.
 

·
Registered
Joined
·
1,865 Posts
2" Blazers fletched right helical with a Bitz at an offset. Helical really helps when shooting broadheads.
 

·
Registered
Joined
·
5,021 Posts
I use a 2 degree off set for all my shafts. 2" blazers for hunting, 1.75" bohning x-vanes for play
 
1 - 10 of 10 Posts
Top