Archery Talk Forum banner

front mount sts?

743 Views 3 Replies 4 Participants Last post by  floridabowman
any one got ideas or pics of homemade front mount sts.ive made rear mount ones before but need a front one now.
1 - 4 of 4 Posts

· Registered
Joined
·
1,621 Posts
I take square steel or alum block wide enough to drill a 3/8" hole in it. Cut it inch and a half to two inches long. Drill two holes one 3/8" and one big enogh for the stablizer bolt to fit through. I drill and tap the end for a set screw to lock the rod down. I then bend the rod to fit around my riser. I cut the rod about a 1/4 " to long for minor adjustments. Rememeber you have to allow about 5/8" for the stopper length. Paint it your favorite color and you have a solid sts.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top