Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
614 Posts
Discussion Starter #1
I need your help identified the cams I have. They are off a 2011 Hoyt Carbon Element with a 29" draw. They read FL2-TL & FL2-BL. Are they referenced as that or are they referenced as something different? Thanks
 

·
Registered
Joined
·
9,763 Posts
The #2 Fuel cam went from 26" (A mod) to 28" (E mod) on the 31 1/16" ATA Element TL stands for top left handed bow, and the BL is the bottom cam for a left handed bow. They will not make 29" on an Element. However if installed on a 35" Matrix (or other 35" ATA bow) they will go from 27" to 29". Hope this answers your question.
 

·
Registered
Joined
·
2,136 Posts
I have a 2011 carbon element and my cams are marked FL2 -tr & br the same as yours other than right hand. If you look at the modules they are marked XR. Yes as stated above they take a module from 2a (26") to 2e 28""
 
1 - 4 of 4 Posts
Top