Fury-X Cams
1 - 7 of 7 Posts
I just found a really cool diagram for a Fury cam and spacers with measurements from GRIV. I'm hoping he or somebody else has the same thing for a Fury-X setup.
http://www.archerytalk.com/vb/showthread.php?threadid=9387&highlight=cam+spacers
http://www.archerytalk.com/vb/showthread.php?threadid=9387&highlight=cam+spacers
Joined
·
1,161 Posts
I took a decent caliper (reads to .001") to Hysell's and measured a few X-cams on rack. I'll be damned if I can remember what the measurement was now....... 
If I was smart, I would have brought my micrometer with me today. I'm thinking I won't have the room to put a Fury-X set on my AccuTec, but I was looking at my Scepter II, and I'll bet the Fury cams on it will fit just fine (size 00), and add an outstanding draw cycle and solid stops to an otherwise very nice bow. Then, I'll have a Scepter II that will need a Fury-X set of cams.
Fury-x cams
The Fury-x is about .760 wide I measured (2) different cams and one was about .757 and the other was .758 so call it .760 and shim from there.
As far as putting one on a Accu-tec it can be done I've got a set on a Accu-tec and it shoots great.
Target 1
The Fury-x is about .760 wide I measured (2) different cams and one was about .757 and the other was .758 so call it .760 and shim from there.
As far as putting one on a Accu-tec it can be done I've got a set on a Accu-tec and it shoots great.
Target 1
1 - 7 of 7 Posts
