Archery Talk Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
1,843 Posts
Discussion Starter · #1 ·
I have had many people ask here and elsewhere about the Xero X1i in low light and even at night with a kill light. Here is a photo I snapped in complete darkness with the X1i set up with the auto color on and orange selected for dim light. I have green selected for bright light. As you can see in the photo, the sight picture is clear and there is no wash out. I have been playing around with the different colors quite a bit. This sight continues to impress.

In this image I have everything tuned off except the aim point level which is represented by the two thin lines next to the single aim point. These lines show if the bow is canted at all.
Black Green Darkness Sky Light
 

· Registered
Joined
·
1,843 Posts
Discussion Starter · #5 ·
So your saying that pot is in the dark. And all you did was look through the sight,and the pic is what you could see.
No. People were asking me about wash out of the sight picture from the electro display in low light and also if it could be used at night with a kill light. The picture was taken in full darkness with a kill light illuminating the pot.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top