Archery Talk Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3,878 Posts
Discussion Starter #1
I'm having a bugger of a time getting my Hoyt ProElite in spec with the correct draw length. I bought this bow new with Cam.5. I tried to get this bow in spec then(AtoA, BH, in time and the correct draw length). I couldn't. So, I got it comfortable and in time and lived with the long AtoA and brace height. It shot fine.
Then I converted it to Spirals and followed everything Hoyt said to do. I can't get the AtoA, BH or DL right. I followed Javi's method but the draw length won't come down to where it needs to be.
Is there anything I should try or just get it comfortable and shoot it letting the specs(AtoA and BH) fall where they fall?
 

·
Registered
Joined
·
381 Posts
For me, that bow is too expensive to just settle...unless you really are satisfied. I Personally.... I don't give up.:eek:
 

·
Registered
Joined
·
3,878 Posts
Discussion Starter #3
I hear you Ken.
Today I put an old string from a used ProElite (same specs) I picked up. It was a bit shorter and now I have perfect DL, BH and fit. Just my AtoA has increased. I'll take it.
 
1 - 3 of 3 Posts
Top