Archery Talk Forum banner

Gold Tip X cutters

1005 11
I've got some Gold Tip X cutters that I'd like to set up for 3D. Looking for suggestions on tip weight and what fletching to use.
1 - 12 of 12 Posts

· Just beat Terry Club
Joined
·
9,369 Posts
I have mine with screw in 100 gr. points with a wrap and fusions on the back.

Weight in at 408 gr ad my 70 GT 500 spits them out at 283.
 

· Registered User
Joined
·
74,554 Posts
28 1/2" draw

I use 90 grn nib and 2.0HP vanetecs. Pin Nocks

I would suggest more weight in front the better. I have shot up to 140grns when I could. Right now just cant shoot that much weight.
DB
 

· Registered
Joined
·
2,024 Posts
I shoot the x-cutter pros 29 inch from noc throat to end of shaft. 90gr glue in 2 inch blazers, pin bushings/w gt nocs.. 352gr total weight. They shoot awesome.
 

· Registered
Joined
·
607 Posts
Discussion Starter · #10 ·
Thanks guys for the help. 2 inch blazers is what I am going to go with, and probably some screw in inserts so I can play around with different tip weight.
 

· Registered
Joined
·
1,814 Posts
Goldtip makes a wrench that you can change the weight out the nock end. Pretty sweet deal!! Mine have x2's and 90 nibbs with a 20 weight and 27 long and around 352 and shoot awesome out of my M7.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top