[dkard]

I have a Avalon plus and one of the lock allen screws for the tiller bolt was backed all the way out. I can not get it lined up to go back nor can I get it out the back. Got it that way, was going to set the bow up to shoot finally and noticed the lock screw was loose.

Anyone now of an easy way to take the pocket off. I figure if I can get the screw our I can chase the threads and start one at the top and screw it in backwards from the top.

 

[Seattlepop]

Not sure if this is similar, but the lock nut on a Hoyt Matrix can only be removed from the top by taking out the limb bolt first.

 

[dkard]

I can get the screw started in the threads to take it out the top. Not sure if the threads at the bottom are messed up or not. . I may try a bottom tap and see if that helps get the lock nut started.

dave

 

[jhinaz]

You have a PM. - John