Archery Talk Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
203 Posts
Discussion Starter #1
Can anyone please tell me what I should look for when tuning this particular bow. I am familiar with tuning procedures for solocams but would like to know if there are cam timing marks that need to line up like there are on my Mathews XT. any help would be greatly appreciated.
 

·
Registered
Joined
·
125 Posts
On my Diamond Triumph the timing marks are located on the mod. it is the 1/8 diameter hole on the mod. According to Pat at Bowtech, he told me this:

The timing should be set at approx .09" from the fixture hole to the edge of the limb.

I do not know if it is the same as your bow but I think that it should be close.
 
1 - 2 of 2 Posts
Top