Archery Talk Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
221 Posts
Discussion Starter · #1 ·
I just picked up an older PSE Bow Madness. I get that setting the screws to "A" backs it all the way out to 30" draw length. However, I dont undestand how to adjust let-off. Any idea how it works on this bow? Also, what are the holes labeled "7,6,0,9"?

bowmadness.jpg
 

·
Registered
Joined
·
39 Posts
From what I see 3 outer holes are 80% and each has a line pointing at correct inner holes for 65% .
 

·
Registered
Joined
·
24,143 Posts

·
Registered
Joined
·
51,165 Posts
From what I see 3 outer holes are 80% and each has a line pointing at correct inner holes for 65% .
Exactly. Even says it right on the cam, that is the draw stop postion. The numbers correspond to the draw length module used.
 
1 - 7 of 7 Posts
Top