Archery Talk Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
107 Posts
Discussion Starter #1
A friend has a Hoyt Ultra-tec bow with this on the cam VP2R, And this on the idlerwheel DTIDL4 . what is the optimun Draw length for this cam? :confused:
 

·
Registered
Joined
·
800 Posts
That would be a Versa Cam...they have a DL range adjustment of approx. 3.5".

If the bow has XT2000 limbs, by looking at the Hoyt tune charts, 28-29" puts you just past the middle of the range for that setup. It should have a max. setting of about 30". IMHO, the closer you shoot it to the max setting, the more cam rotation you are going to get, and the better it will perform. For draw lengths under 28", the smaller #1 Versa Cam would be a better choice IMHO.

Hope that helps....

CharlieL
 
1 - 2 of 2 Posts
Top