Archery Talk Forum banner

help with dren ld

399 Views 4 Replies 4 Participants Last post by  KSU Turkey Nut
I'm shooting a dren ld the problem I have is when the arrow is set at true center the fletching hits the risor the only way i can get it to shoot is with the arrow pointing left when but it shoots a perfect hole in paper. Why will it not center :mad:
1 - 5 of 5 Posts

· Registered
Joined
·
3,974 Posts
Clearence

Set the clearence on the rest at 3/4" to 13/16" from the inside if the riser at the berger button hole to the center of the arrow shaft.
That is what Mathews recommends and I have shot several different models with that setting and have had absoultly no clearence problems even with Blazer vanes and GT Xcutter shafts with the cock feather straight up.
Ihave had bows with the cable slide and others with the roller guard, NO PROBLEMS.
Charlie
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top