[djscott]

I recently bought a conquest 2 from a guy on ebay which was advertised as a 28" bow. However, the bow is labeled a 29". how can I tell what the cam is?
I'm not sure if its been changed. Also, the draw length is a little long. On the cam there are three post labaled 1,2,3. Which one will shorten up the draw length? the cam is marked " zddr hl" if that helps.

 

[bow4life]

What are the markings on you cam? For example, Z-DDL-HL is a 29" maxcam.

 

[Donhudd]

1 post is longest draw length. 3 post is shortest draw length. 2 post should be 28 1/2 and 3 post should be 28 inch. (so sez the Owners Manual)

 

[djscott]

thanks alot

the cam is marked zddr hl. What does that stand for?

 

[bow4life]

Z-DDR-HL is a right hand 29" maxcam. If you need a 28" right hand you need a Z-EER-HL for 80% letoff or a Z-EER for 65% letoff.

 

[trheebs]

If you take your cam and put the string on the #3 post on both sides of the cam, you should be in the 28" draw length. The DDR will go 29-28".