Archery Talk Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
238 Posts
Discussion Starter #1
I read in your Spitfire test that they preformed better taking out the tension washers.
Was it a rubber band you used or an O ring?
Where can I get some?
Thanks :D
 

·
Registered
Joined
·
1,415 Posts
First let me say that NAP does not recomend this practice. They probably cringe everytime someone suggests it!:D That said they do open a heck of a lot faster without the "clips" I used the same little rubberbands that come with Rocket heads. With them installed they open as fast as any head on the market, still shoot great, and I didn't have any problems. Just be sure that the rubber bands fit tight enough to hold the blades closed until the hit something, and remember if you decide to use them without the retainer clips you do so at your own risk. I have to put that last part in to make the lawyers happy:eek: :confused: :D
 

·
Registered
Joined
·
488 Posts
Use the NAP Scorpion XP 100

Your better off just using the new NAP Scorpion XP 100 heads so you don't have to shot the spitfire with out the clips, just look at both of them in 5 shots test.:D

Eugene
 
1 - 3 of 3 Posts
Top