Joined
·
12 Posts
Hi guys,
I'm getting back into archery again after several years away from it, and I need some assistance in rebuilding my old High Country.
I'm not sure of the year model, but what I have is a Machined Supreme riser with XL 70 pound limbs.
The cams are W2/W1 hatchets with "B" modules installed.
ATA measures 43 1/2" , Brace is 8 3/16" , and draw length is 31"
If anyone can help me, I need to know if these specs look right, so I can figure lengths for a new string set.
Also, I need to find someone who has modules for the hatchet cams to get me down to 30" draw length.
Any help y'all can offer is greatly appreciated.
I'm getting back into archery again after several years away from it, and I need some assistance in rebuilding my old High Country.
I'm not sure of the year model, but what I have is a Machined Supreme riser with XL 70 pound limbs.
The cams are W2/W1 hatchets with "B" modules installed.
ATA measures 43 1/2" , Brace is 8 3/16" , and draw length is 31"
If anyone can help me, I need to know if these specs look right, so I can figure lengths for a new string set.
Also, I need to find someone who has modules for the hatchet cams to get me down to 30" draw length.
Any help y'all can offer is greatly appreciated.
