Archery Talk Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
Bought a fairly new trophy ridge dropzone used. The cord is a little short so I can't tie it on properly to my bowstring. Does anyone have any advice on replacing the cord. I can see how it comes apart but I don't want to open it up and have parts flyin' out. Don't have time to send it back-
 

·
Registered
Joined
·
182 Posts
rip cord

i took one apart for a friend of mine. i don't know how to explain it, but it wasn't hard at all and no parts are going to fly out at you. if you open it up you will see how easy it is.
 

·
Registered
Joined
·
182 Posts
sorry i should have read alittle closer i thought it said rip cord rest. my bad i have never messed with a drop zone
 

·
Registered
Joined
·
2,754 Posts
I have took my drop zone apart and replaced cord No flying parts after you get it apart pretty self explanatory should have no problem
 

·
Registered
Joined
·
1,545 Posts
Yeah its not to difficult to take apart and put back together. Threading the rope cord back through the pulley can be troublesome, but not impossible. Just keep track of how the pieces go back together.
 
1 - 7 of 7 Posts
Top