Archery Talk Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
78 Posts
Discussion Starter #1
Ive got a Hoyt Accutec dual cam bow I picked up awhile back.
Can anyone give me any info on when these were made? Are they a good bow?
It shoots great.
 

·
Registered
Joined
·
768 Posts
well put it this way...

i see u said that ur accutec shoots great... of course it does, many of the Hoyt 3D pro staff used this bow in the mid 90's, this was one of then vice pres.. randy walk's attempt at the truss added to the riser... as far as the consumer goes..back then it wasnt it a big hit.. not everyone but most thought to be ugly hideous said it wuldnt work... Randy claimed it was like that on the riser to dampen vibration but it just didnt kick off like he planned he released another like that in his bow line as well.. but still not a big loved following..fast forward to today... and well, as u see we hoyt fans get enough of that tec/truss riser hhehe
 

·
Registered
Joined
·
78 Posts
Discussion Starter #4
Thanks guys! :teeth:
This is a beautiful bow, green and black riser with black and silver limbs. Its a smoker at 307 fps with GT 7595s.
Thanks again for the help!
 

·
Registered
Joined
·
1,417 Posts
If you have the command cams or master cams then you have (as far as I'm concerned) the best two cam setup ever made by Hoyt.
 
1 - 5 of 5 Posts
Top