Archery Talk Forum banner

Hoyt Alpha X 30 65# 28”-30” complete speed test

1 reading
6.6K views 11 replies 9 participants last post by  stampy  
#1 ·
Image

For those curious and not saying they are all like this. But I had a friends bow to setup pre release. So I checked it out pretty good. Draw length measured 30.25” on the dot at 85% , poundage was 65.10#. This was the first bow that I’ve touched that hit or exceeded advertised speed out of the box. Added a Raptor peep which was 18 gr and it didn’t change. All results are in hunting trim. D loop , tied nock set and peep. Numbers checked on two separate chronos over 2 days. And yes the 322 at the bottom wasn’t a typo lol. That’s why it got checked twice. Everything was a 5 shot average done twice.
OTBS (out of the box speed) 65# 30.25” dl and 325gr arrow was 347,348 fps
 
#2 ·
That's good info thx. I'm 28.5 stretched. Definitely be worth stepping down to 28.25 off your information. I'm ready to upgrade. Hunting with switchback xt. Anxious to see a vid/write up on comparison b/w VTM 31 and new Alpha x 30. Smoothest draw, noise level, and accuracy are most important to me.
Also looking at the Mathews v3x and prime revex.
 
#7 ·
That's good info thx. I'm 28.5 stretched. Definitely be worth stepping down to 28.25 off your information. I'm ready to upgrade. Hunting with switchback xt. Anxious to see a vid/write up on comparison b/w VTM 31 and new Alpha x 30. Smoothest draw, noise level, and accuracy are most important to me.
Also looking at the Mathews v3x and prime revex.
If you go on Hoyt’s website they give you the sound levels from the VTM and the new alpha x.
 
#3 ·
Extrapolating your numbers it's 12-14ish fps faster than my Phase 4 33.

What mod were these tests run on and if it was changed can you add that info? I didn't buy a Hoyt last year because as a 27.5-28 DL shooter they didn't have a cam/module that was interesting to me on a bow 33-34 ata. These new ones with 3 modules are interesting to me. Quarter inch draw length adjustment is also a huge improvement for me.