Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Ok, trying to quieten down my Hoyt Trykon XL.
I noticed that the cable slide is loose and causing a rattle. It needs to be able to move but not rattle. Anyone had this problem?
 

·
Registered
Joined
·
3,254 Posts
Check to make sure that your rod is tight. That can be one cause.
 

·
Registered
Joined
·
703 Posts
Hoyt Cable slide

Your problem is probably elsewhere. That cable slide is in a constant tension mode caused by buss cable and control cable pressure. That's a carbon rod isn't it? Check it and make sure it is being held by the two riser screws.
 

·
Registered
Joined
·
7,704 Posts
Yep, sounds like the rod to me. Just make sure the 2 screws are good and tight and you shouldbe good to go.
 
1 - 4 of 4 Posts
Top