[Robert Ogden]

on an 03 hoyt ultra tec the bottom cam lean so much that it almost miss the draw stop on cam 1/2

how do i fix this

 

[Robert Ogden]

anyone

ttt

 

[JAVI]

Just a guess... but do you have a split yoke cable on the top limb and/or either an aftermarket cable slide or a offset rod>

 

[Robert Ogden]

more help

every thing factor and has a straight cable rod and a floating yoke

why is the bottom cam lean so bad

 

[JAVI]

Have you had the bow apart.. (cam removed) if so is the 0.050 thrustwasher on the string side and the 0.030 thrustwasher on the cable side?

 

[Robert Ogden]

ok ..but

never been apart .....brought new ...it seem to just happen in the last 6 mouths

 

[Robert Ogden]

more

need more info ...please

 

[JAVI]

Robert I can guess till the cows come home, but that's all it would be.

The things that will cause the problem you have described are many. Cables not adjusted correctly, thrushwashers worn, string to tight, and many other things... even you and hand torque when you draw the bow and pull the cams over to the side... In extreme cases it could be limb set although that doesn't happen that often..