Archery Talk Forum banner

1 - 2 of 2 Posts

·
Premium Member
Joined
·
960 Posts
Discussion Starter · #1 ·
My Katera XL is supposed to be a 30 inch draw....

It has sideplates instead of the original grip so it should run about 30.25.

The ATA is dead on at 36.25 and the brace height is dead on at 7.25.

I measured from the string to the grip and I get 28.75.

Is this correct?

Do you add only 1.5" instead of 1.75" because of the additional .25" for not having a grip?

Thanks,

Nacho
 

·
Registered
Joined
·
14,506 Posts
well with your grip off you will get a tad longer than with stock grip SO if you had grip on you would prolly measure 28.25 as im sure the grip makes the 1/2 inch difference THEN you would add the IBO 1.75 inches and be right around your 30" I would put the grip on and see how much it takes up if your not happy with DL, if your fine with it and it fits you then dont worry as it seems you have the bow in spec just fine as you said the other stuff is pretty much on, and you didnt state cams being timed but im assuming you have already made sure they are
 
1 - 2 of 2 Posts
Top